Pay in installments of $207.12 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 23 - Jul 28
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Shure QLXD14/83 Lavalier Wireless Microphone System (X52: 902 to 928 MHz)For capturing audio, the QLXD14 83 Lavalier Wireless Microphone System by Shure is a good choice to get the job done. It can be used for mid size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24 bit digital audio, network control, and AES 256 encryption. The QLX D wireless system is built with switching diversity and automatic channel scan, and has IR sync
For capturing audio, the QLXD14/83 Lavalier Wireless Microphone System by Shure is a good choice to get the job done. It can be used for mid-size events and installations in businesses, hotels, government offices, schools, houses of worship, live performance spaces, and more. It features 24-bit digital audio, network control, and AES-256 encryption.
The QLX-D wireless system is built with switching diversity and automatic channel scan, and has IR sync capabilities to make finding an open frequency quick. Featuring a frequency range of 20 Hz to 20 kHz, it offers more than 60 available channels per frequency band. The receiver and beltpack also feature a backlit LCD display to allow for navigation though the menus and controls. With clearly defined performance the QLX-D wireless delivers clean audio and provides professional features for demanding live sound events and installations.
The QLXD14/83 system includes a QLXD4 receiver, one QLXD1 transmitter with a WL183 omnidirectional microphone, a PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, a zipper bag, two AA Alkaline batteries, and rackmount hardware.
Features
- 300 feet (100 meters) line-of-sight operating range
- 120 dB dynamic range
- Digital predictive switching diversity receiver to capture the clearest sound
- 64 MHz tuning bandwidth
- Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Automatic channel scan
- Selectable display mode showing group/channel, frequency, or battery runtime
- Rugged metal construction
Specifications
| RF Carrier Frequency Range | X52: 902 to 928 MHz |
| Working Range | 330' / 100 m Note: Actual Range Depends on RF Signal Absorption, Reflection, and Interference |
| RF | Tuning Step Size: 25 kHz, Varies by Region |
| Image Rejection | >70 dB, Typical |
| RF Sensitivity | -97 dBm at 10-5 BER |
| Latency | <2.9 ms |
| Audio Frequency Response | QLXD1: 20 Hz to 20 kHz (±1 dB) |
| Audio Dynamic Range | System Gain @ +10: >120 dB, A-Weighted, Typical |
| Total Harmonic Distortion (THD) | -12 dBFS Input, System Gain @ +10: <0.1% |
| Polarity | System Audio: Positive Pressure on Microphone Diaphragm Produces Positive Voltage on Pin 2 (with Respect to Pin 3 of XLR Output) and the Tip of the 1/4" / 6.35 mm Output |
| Operating Temperature Range | 0 to 122°F / -18 to 50°C Note: Battery Characteristics May Limit This Range |
| Storage Temperature Range | -20 to 165°F ? -29 to 74°C Note: Battery Characteristics May Limit This Range |
| Housing | Steel |
| Power Requirement | 12 VDC @ 0.4 A, Supplied by External Power Supply (Tip Positive) |
| RF Input | Spurious Rejection: >80 dB, Typical Connector Type: BNC Impedance: 50 Ohms |
| Audio Output | Gain Adjustment Range: -18 to +42 dB in 1 dB Steps Configuration: 1/4" / 6.35 mm, Impedance Balanced (Tip=Audio, Ring=No Audio, Sleeve=Ground) XLR: Balanced (1=Ground, 2=Audio +, 3=Audio -) Impedance 1/4" / 6.35 mm, 100 Ohms (50 Ohms Unbalanced) XLR: 100 Ohms Full Scale Output: 1/4" / 6.35 mm, +12 dBV XLR: LINE Setting= +18 dBV, MIC Setting= -12 dBV Mic/Line Switch: 30 dB Pad Phantom Power Protection: 1/4" / 6.35 mm, Yes XLR: Yes |
| Networking | Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP Address Maximum Ethernet Cable Length: 328' / 100 m |
| Dimensions | 1.63 x 7.75 x 5.94" / 41 x 197 x 151 mm |
| Weight | 1.71 lb / 777 g |
| Housing | Cast Aluminum |
| Mic Offset Range | 0 to 21 dB (in 3 dB Steps) |
| Battery Type | Shure SB900 Rechargeable Li-Ion or AA Batteries 1.5 V |
| Battery Runtime | At 10 mW: Shure SB900: Up to 10 Hours Alkaline: Up to 9 Hours |
| Audio Input | Connector: 4-Pin Male Mini Connector (TA4M) Configuration: Unbalanced Impedance: 1 MOhm Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: -120 dBV, A-Weighted, Typical |
| RF Output | Connector: SMA Antenna Type: 1/4 Wave Impedance: 50 Ω Occupied Bandwidth: <200 kHz Modulation Type: Shure Proprietary Digital Power: 1 mW or 10 mW Varies by Region |
| Dimensions | 3.38 x 2.57 x 0.92" / 86 x 65 x 23 mm |
| Weight | 4.9 oz / 138 g, Without Batteries |
| Model | WL183 with TA4F Connector |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy